Fabrication of nano/microstructures for SERS substrates using an electrochemical method

• Jingran Zhang,
• Tianqi Jia,
• Xiaoping Li,
• Junjie Yang,
• Zhengkai Li,
• Guangfeng Shi,
• Xinming Zhang and
• Zuobin Wang

Beilstein J. Nanotechnol. 2020, 11, 1568–1576, doi:10.3762/bjnano.11.139

• . [47] employed femtosecond laser irradiation to fabricate nanorod arrayed structures decorated with Au nanoparticles. The study showed that the Raman intensity tended to decrease as the Au film thickness increased. Based on the above results, we selected Au films of 10 nm thickness for further

Biomimetic surface structures in steel fabricated with femtosecond laser pulses: influence of laser rescanning on morphology and wettability

• Camilo Florian Baron,
• Alexandros Mimidis,
• Daniel Puerto,
• Evangelos Skoulas,
• Emmanuel Stratakis,
• Javier Solis and
• Jan Siegel

Beilstein J. Nanotechnol. 2018, 9, 2802–2812, doi:10.3762/bjnano.9.262

• angle measurements of water drops placed on the surface reveal that a wide range of angles can be accessed by selecting the appropriate irradiation parameters, highlighting also here the prominent role of the number of scans. Keywords: biomimetics; femtosecond laser irradiation; laser-induced periodic

Laser-assisted fabrication of gold nanoparticle-composed structures embedded in borosilicate glass

• Nikolay Nedyalkov,
• Mihaela Koleva,
• Nadya Stankova,
• Rosen Nikov,
• Mitsuhiro Terakawa,
• Yasutaka Nakajima,
• Lyubomir Aleksandrov and
• Reni Iordanova

Beilstein J. Nanotechnol. 2017, 8, 2454–2463, doi:10.3762/bjnano.8.244

• . At 355, 532 and 1064 nm, no coloration of the sample was observed. The femtosecond laser irradiation at 800 nm also induced defects, again observed as brown coloration. The absorbance spectra indicated that this coloration was related to the formation of oxygen deficiency defects. After annealing

• nanoparticles inside borosilicate glass. The nanoparticle growth process includes two steps – laser-induced defect formation and thermal annealing. Nanosecond and femtosecond laser irradiation with different parameters is used in order to induce defects into the glass. These are clearly manifested when using

• the defect-containing volume, but rather by a change of the characteristics of the particles formed during the annealing stage. It should further be noted that under all experimental conditions where glass coloring occurred, white light emission was observed accompanying the femtosecond laser

Nanostructuring of GeTiO amorphous films by pulsed laser irradiation

• Valentin S. Teodorescu,
• Cornel Ghica,
• Adrian V. Maraloiu,
• Mihai Vlaicu,
• Andrei Kuncser,
• Magdalena L. Ciurea,
• Ionel Stavarache,
• Ana M. Lepadatu,
• Nicu D. Scarisoreanu,
• Andreea Andrei,
• Valentin Ion and
• Maria Dinescu

Beilstein J. Nanotechnol. 2015, 6, 893–900, doi:10.3762/bjnano.6.92

• to the laser wavelength or harmonics [27]. This happens at all wavelengths and pulse durations, as in the case of femtosecond laser irradiation [28]. The stress-induced periodic-ripples mechanism demonstrated for crystalline Si [29] could be used for amorphous materials if we define a stress yield

Observation and analysis of structural changes in fused silica by continuous irradiation with femtosecond laser light having an energy density below the laser-induced damage threshold

• Wataru Nomura,
• Tadashi Kawazoe,
• Takashi Yatsui,
• Makoto Naruse and
• Motoichi Ohtsu

Beilstein J. Nanotechnol. 2014, 5, 1334–1340, doi:10.3762/bjnano.5.146

• photogenerated carriers in a degraded silica substrate and a damaged silica substrate and observed a Raman signal originating from a specific molecular structure of silica. From these findings, we concluded that compositional changes in the molecular structure occurred during degradation due to femtosecond laser

• irradiation having an energy density below the LIDT. Keywords: compositional change in molecular; femtosecond laser; fused silica; laser-induced damage; laser-induced degradation; Introduction Since the invention of the laser, it has been widely known that damages occur at the surface or interior of optical

Femtosecond-resolved ablation dynamics of Si in the near field of a small dielectric particle

• Paul Kühler,
• Daniel Puerto,
• Mario Mosbacher,
• Paul Leiderer,
• Francisco Javier Garcia de Abajo,
• Jan Siegel and
• Javier Solis

Beilstein J. Nanotechnol. 2013, 4, 501–509, doi:10.3762/bjnano.4.59

• . Further details regarding the preparation procedure and optical properties of the different substrates and particles used, as well as near field imaging using GST films can be found elsewhere [11]. Femtosecond laser irradiation and time-resolved microscopy Figure 2 shows a scheme of the set-up used for